Special cement-base tile adhesive (copolymer powder of vinyl acetate and ethylene) of high quality. Use mainly for heavy tiles adhesion such as natural stone & marble. Also used for polystyrene board. Meets European standards: EN 12004/C2, EN 12004/C2T, EN 12004/C2E, EN 12004/C2ET.
High adhesion strength exceeds 1 N/mm².
Withstands high pressure, hence used for adhering heavy tiles.
Excellent adhesion despite variation in temp.span (-5 to +60 °C). Also, product performance is resistant to shrinkage and expansion due to change of temperature and humid conditions.
Special "extended open time" features that enhances strength of adhesion.
High flexibility properties that makes product performance resistant to shocks.
Put clean water (without chemical additives) in clean mixing container
Mix at a ratio of ± 4 kg powder to ± 1 liter of water.
Stir by a hand agitator the admixture well for 30 seconds.
Make sure that everything is mixed
Use an electrical agitator to mix for 1 minute the admixture.
Wait for a 5 minutes period (settle-down) before application.
Preparation of surface:
Clean all foreign matter
Surface & tile must be moistened with water before applying the mixture, especially old surfaces.
Apply a layer of the admixture to the prepared surface using any trowel.
Use a notched trowel to spread the admixture layer to create air escape spaces.