General description:

Gypsum powder filler (copolymer powder of vinyl acetate and ethylene), using as jointing filler and skim coat for interior gypsum board. It meets European standards EN 998-1/IN, EN 998-1/ INS, EN 998-1/ INR, EN 998-1/ INSR.

• Elastic properties.
• Filling properties.
• Acrylic, excellent adhesion.
• Odorless, mercury-free and lead-free.
• Environmentally friendly, non toxic and non-flammable

• Put clean water (without chemical additives) in clean mixing container
• Mix at a ratio of 3-4 kg of powder to 1 liter of water.
• Stir the admixture by hand for 30 seconds.
• Make sure that everything is mixed
• Use an electrical agitator to mix the admixture for one minute

• Fill a layer of QP Kraft in the joint using a trowel and wait to dry.
• Use fiberglass tape to cover joints.
• Apply second coat of QP Kraft to penetrate into the joint
• Scrape the surface well
• Apply a coat of primary emulsion.
• Apply two layers of SILKYCOAT putty to make surface smooth
• Apply two layers of emulsion for final finishing.