ملزمة تثبيت


  • ملزمة ميجا 6 انش

    Mega Hand Tools ملزمة ميجا 6 انش

    متوفر

    About this item Hand tools Type: Bench Vise Brand: Mega Model number: MG17115 Size: 6" Product details Package Dimensions ‏ : ‎ 34.4 x 20.4 x 19.8 cm; 11.66 Kilograms

    متوفر

    40.000 JOD

  • ملزمة طاولة ميجا 4 انش

    Mega Hand Tools ملزمة طاولة ميجا 4 انش

    متوفر

    متوفر

    31.900 JOD

  • 16MM TUBE BENDER||اداة ثني مواسير النحاس - Mega Hardware

    super ego اداة ثني مواسير النحاس

    16MM COPPER TUBE BENDER 5/8 OD Light tool for easy bending. For bending pipes from 0 º to 180 º in all planes without tube distortion. Specially designed for bending soft copper, brass and aluminium tube as well as thin wall steel pipes.

    68.000 JOD

  • بريصة ثنائية 8 انش

    Mega Hardware L بريصة ثنائية 8 انش

    DAMAGE-FREE REMOVAL: The ABN 8" Inch 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel makes removal simple and damage-free BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress GET INTO TIGHT AREAS: Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application 8-POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short, standard, long, or extra-long reach

    8.250 JOD

  • بريصة ثلاثية 3 اصابع 4 انش

    Mega Hardware L بريصة ثلاثية 3 اصابع 4 انش

    This three-jaw puller is made of heat-treated carbon steel to give you over a ton of pulling power. The 4 in. puller has reversible jaws to ensure proper grip on a wide range of jobs. The chrome finish helps fight rust and corrosion. Reversible jaws for inside and outside pulling Rugged heat-treated carbon steel Polished chrome finish

    12.500 JOD

  • بريصة ثنائية 8 انش

    Mega Hardware L بريصة ثنائية 8 انش

    This three-jaw puller is made of heat-treated carbon steel to give you over a ton of pulling power. The 8 in. puller has reversible jaws to ensure proper grip on a wide range of jobs. The chrome finish helps fight rust and corrosion. Handles gears or bearings from 6 in. to 10 in. diameter Reversible jaws for inside and outside pulling Rugged heat-treated carbon steel Polished chrome finish

    11.600 JOD

  • مفتاح رنجات سيتافورم

    CETA FORM مفتاح رنجات سيتافورم

     Forged Chrome Molybdenum material. The design of the jaws allows working in narrow spaces under the wheel arch. Capacity 65-320 mm

    99.000 JOD

  • طقم تفليج  3/16-5/8

    Imperial طقم تفليج 3/16-5/8

    غير متوفر

    Imperial Eastman 195FC Imperial flaring tool 3/16-5/8"

    غير متوفر

    58.500 JOD

  • ملزمه طاوله 3انش ميجا 4.5 كغم

    متوفر

    29.000 JOD

  • ملزمة ميجا 2 انش

    Mega Hand Tools ملزمة ميجا 2 انش

    متوفر

    Product details of 2 Inch Engineers Swivel Base Table / Bench Vice For Universal Work 2 Inch Engineers Swivel Base Table / Bench Vice For Universal Work 2" 50mm Engineer's Vice with a Swivel Base 60mm capacity jaws Manufactured from cast iron to resist distortion Chrome plated steel screw & handles. Maximum Opening: 60mm Swivel base rotates 360 Degrees For Table mounting 2 x T handles to tighten the swivel block in place Feel comfortable working on objects with powered and nonpowered tools when fastening them in this engineering quality table Mounted vice. Its sturdy construction made from cast iron resists all distortion and holds whichever material you choose to work on giving you confidence knowing your work piece won't budge. Directly mounts onto a table and swivels a full 360 Degrees . Thandles on either of the vice allow you to tighten it in place for ease of use. This vice is more or less an integral part of the workplace, every workshop and home garage needs one.

    متوفر

    14.500 JOD

تسجيل الدخول

هل نسيت كلمة المرور؟

لا تملك حساب ؟
انشاء حساب جديد